Inexpensive muslin mesh bag with no drawstring. These bags are perfect for adding hops in the boil or dry-hopping. Also, great for steeping grains. These versatile bags can even be used to pre-filter sediment.
All in one brewing systems with recirculating pumps are where it's at. They make brewing simple and easy and get homebrewers doing all-grain earlier, many starting with their very first batch. The Robobrew is going to lead the charge with its amazing price point.
The Robobrew is an all-in-one electric brewing system that has built in elements for heating and boiling, a built in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built in spigot for transferring. It is extremely portable and uses 110v power so it can be used nearly anywhere.
Built in magnetic drive pump to easily recirculate the wort during the mash. We recommend getting some silicone tubing to go with the recirculation arm. This allows you more control over the recirculation and you can then use the pump to transfer your wort to your fermenter.
Dual heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One element is 1000 watts and the other is 500 for a combined 1500 watts! Use both when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.
The digital control panel makes it easy to see the current temperature and set the temperature you want. You can also set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or get up in the morning. The digital controller is also water resistant so don't worry about spills or some water dripping down the side. This controller is built for brewing!
The brewery also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it from the RoboBrew and tabs at the base so you can set the malt pipe over the RoboBrew to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.
The included stainless wort chillers is shipped with bare ends so you can set it up for your situation. We list below the most common tubing and fittings sold to help connect to a hose, hose bib, or faucet.
Note: The manual references an element for a different market. This unit comes with a two heating elements for a total of 1,500 watts.
Stainless steel construction
9 gallon total capacity with a finished beer output of 5-6 gallons
Digital temperature controller
110v power and plug
Dual heating elements for total control (1000 watts and 500 watts)
Stainless steel 1/2 in ball valve for draining (don't have to use the pump)
Immersion wort chiller included
Stainless steel malt pipe/basket
Stamped volume markers
Magnetic drive pump for recirculation
Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)
32.75 in H (with recirculation arm) x 12.5 in D
Recommended max. grain bill - 18 lbs
Recommended min. grain bill - 8 lbs
You might also want:
2' of 1/2" ID Silicone tubing for sparging and draining.
To connect includedchiller: 20' of 1/2" ID tubing, 3 small hose clamps and 1 brass Garden Hose Thread by 1/2" barb adaptor.
High Pressure Banjo Propane Stove. 17" large cooking surface. Designed to safely support large cooking pots. Welded Steel Frame. 48" LPG Rubber Hose 30 PSI Preset Regulator w/ Brass Control Valve & 10"diameter cast iron element/burner. Approx 185,000 BTU's.
A value-minded brew kettle for mid-size beer batches. Made of 100 percent stainless steel and available for a truly economical price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. Add a domed false bottom to this stainless brew kettle and you can even use it as a mash tun. The couplers are 1/2" female pipe thread.
From boiling, brewing, frying or whatever the job might be, this little stove has the power to get it done. The maximum output high-pressure burner system heats mass amounts of liquid in a hurry and will maintain it at boiling temperatures making it a great cooker for home canning and sea food boils. The small compact stove is also a great item to have on hand for emergency preparedness.