Fittings, Valves, & Hardware

Used to make a Tri Clover Compatible fitting to tubing connection. Made of 304 stainless steel.

Pair of Quick Disconnect 90 degree 1/2" hose barbs for Super Transfer Pump and Flo-Jet pumps.

Replacement racking cane sediment tip for the 1/2" Racking Cane.

Used to make a Tri Clover Compatible fitting to tubing connection. Made of 304 stainless steel.

Replacement racking cane sediment tip for the 3/8" Racking Cane.

Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a beer shank nut. Made of stainless steel. This elbow shaped tailpiece helps you fit your tubing runs in tight spaces, requiring just 1 5/8" clearance above the tap or behind the shank.

Complete assembly. Comes with QD faucet adapter, chrome plated faucet with stainless steel lever, faucet knob and ball lock beverage out quick disconnect.

Tri Clover Compatible 3-Piece Ball Valve. Ball valves tend to do a better job at controlling flow rates than Tri Clover Compatible butterfly valves. We usually recommend butterfly valves at vessel outlets and on fermenters and Tri Clover Compatible ball valves on pump outlets and vessle returns.

Replacement spinning spray head for our WE492 Stainless Barrel Washer. 3/4" FPT connection.

Sanitary butterfly valve has a pull-ball lock on it. The handle ball is simply pulled to rotate the valve gate and can be rotated 180° so it can be closed on either side. Butterfly valves can be cleaned in place. They are also lighter and more compact that Tri Clover Compatible ball valves. Made of 304 stainless steel.

This heavy duty clamp is used with a gasket and two Tri Clover Compatible fittings to make a connection. Made of 304 Stainless Steel.

Simple Tee that works great with 5/16" ID tubing.

This diffusion stone is ideal to force carbonate your kegged beer, or as an aeration stone prior to fermentation. It produces nice small buBBLes, giving more surface area for diffusion.

316 Stainless Steel
1/2" diameter. Stone is 1" in length. Overall length is 1 7/8"
The barb is 1/4" OD

Use this Dip Tube O-ring to replace worn out rings inside your keg. This ring will fit both the gas in and liquid out dip tubes of a Cornelius keg.

Tri Clover Compatible 90° Elbow, made from 304 stainless steel.

This versatile faucet brush makes it easy to scrub your draft beer parts.

The Faucet Cleaning Adapter makes it a cinch to back-flush your draft lines for cleaning. Simply remove your draft faucet and mount the adapter in its place, leaving you with a 3/8” barb to connect tubing.

Required accessory to attach and remove a beer faucet from a shank without scratching up the shank or coupling nut.

This is a special 1/4" nut and 5/16" barb that will attach to threaded quick disconnects or other 1/4" male flare fittings and allow 5/16" gas tubing to be attached.

Stainless Steel barb with a chrome plated Brass nut.

BUNA-N tri clover gaskets have a fairly narrow temperature range (-30ºF to 200ºF) but remain flexible across that range and seal well. They do not do well with acid (Star-San is fine) or caustic cleaners and should be kept away from UV light where they can oxidize. BUNA-N gaskets are a good choice for the fermentation side where their low cost makes them indispensable. Black in color.

Series 300 stainless steel band helps provide resistance to corrosion. Stainless steel screw resists corrosion. Miniature size for small hoses installed in confined spaces.

Keep your beer taps clean and sanitary with Kleen Plug. This durable brush / plug keeps fruit flies out of beer taps. It also removes yeast and sediment, for fresher, better-tasting beer. Kleen Plug’s innovative stepped design fits into a variety of beer tap openings, and can be chained together for ease of use. Also fits some bottle speed rail dispensers.

Replacement Low Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.

1/4” MPT Right-hand thread.

Plastic "T" fitting for 3/16" and 1/4" I.D. tubing.

Tri Clover Compatible Clamp Style Concentric Reducer. Used to make a sanitary connection between two sanitary fittings. Made of 304 stainless steel.

Meets 3A and FDA criteria for direct contact with food & beverage. Screen gaskets for Tri Clamp / Tri Clover style fittings.

Meets 3A and FDA criteria for direct contact with food & beverage. Screen gaskets for Tri Clamp / Tri Clover style fittings. EPDM has excellent resistence to caustics, hot water & steam. Hot water & steam rated to 300F.

Meets 3A and FDA criteria for direct contact with food & beverage. Screen gaskets for Tri Clamp / Tri Clover style fittings.